Flight controllers, powertrains, frames, batteries, telemetry and payload hardware.
Core UAV bill-of-materials parts for builders, labs and integrators. Off-the-shelf parts can be bought directly; build-specific or matched sets are quoted.
8 products
Flight Controllers
The Pixhawk 2.4.8 is a 32-bit open-source autopilot that brings full ArduPilot and PX4 flight-stack capability to hobby and academic drone builds at a very accessible price.
₹8,499 + 18% GST
Flight Controllers
The Matek F405-OSD is a compact F4-class flight controller built for FPV racing and freestyle quadcopters, pairing a 168 MHz STM32F405 MCU with an ICM20602 gyro/accelerometer for fast, clean control loops.
₹2,999 + 18% GST
Flight Controllers
The Holybro Kakute H7 V1.3 is a high-performance 30.5 mm FPV flight controller built around the powerful STM32H743 MCU running at 480 MHz.
₹9,999 + 18% GST
Flight Controllers
The Radiolink Pixhawk is a 32-bit Pixhawk-class autopilot aimed at UAV, fixed-wing, multirotor and rover builders who want a complete, ready-to-fly ArduPilot/PX4 platform.
₹14,999 + 18% GST
Flight Controllers
The Holybro Pixhawk 6C is a modern FMUv6C-standard autopilot built around a 480 MHz STM32H743 Cortex-M7 main processor with an STM32F103 I/O co-processor, delivering substantially more processing power and memory than older FMUv2 boards.
₹31,499 + 18% GST
Flight Controllers
The Holybro Pixhawk 6C Full Set combines the modern FMUv6C autopilot with both a PM02 power module and an M9N GPS, giving you everything needed for autonomous waypoint navigation in one package.
₹43,499 + 18% GST
Flight Controllers
The Holybro Pixhawk 6C Mini combo packs the same FMUv6C-class capability as the full-size 6C into a smaller footprint, bundled with a PM06 power module and an M9N GPS for a compact yet complete autonomous-flight stack.
₹26,499 + 18% GST
Flight Controllers
The SpeedyBee F405 V4 stack pairs an F4-class flight controller with a 60A BLHeli_S 4-in-1 ESC on the 30.5 mm standard, giving FPV builders a complete, well-integrated power-and-control core for 5-inch and larger freestyle and racing quads.
₹9,499 + 18% GST
8 products
Gps Gnss
The u-blox NEO-6M is a complete, low-cost GPS receiver module that has become the default entry point for hobbyists, students and makers learning satellite navigation in India.
₹699 + 18% GST
Gps Gnss
The u-blox NEO-M8N GPS with integrated compass is the workhorse positioning module for Pixhawk and APM/ArduPilot flight controllers, and one of the most widely sold drone GPS units in India.
₹1,999 + 18% GST
Gps Gnss
This u-blox NEO-M8N (M5T) module pairs the 72-channel u-blox M8 GNSS engine with a high-gain ceramic active antenna, sold without an integrated compass as a compact, antenna-up positioning receiver.
₹2,899 + 18% GST
Gps Gnss
The u-blox NEO-M9N GPS breakout with SMA connector is a high-quality, four-constellation GNSS board built around the 92-channel u-blox M9 positioning engine.
₹2,499 + 18% GST
Gps Gnss
The Holybro M10 GPS is a modern, drone-ready navigation module built around the u-blox M10 (UBX-M10050) engine, designed to plug directly into Pixhawk-family flight controllers running PX4 or ArduPilot.
₹5,999 + 18% GST
Gps Gnss
The Holybro M9N GPS is a high-performance drone navigation module built on the 92-channel u-blox NEO-M9N engine, delivering concurrent four-constellation reception (GPS, GLONASS, Galileo, BeiDou, plus QZSS) and 1.5 m CEP navigation accuracy.
₹8,499 + 18% GST
Gps Gnss
The CUAV NEO 3 is a cost-effective, industrial-grade GNSS module built around the u-blox NEO-M9N receiver, designed for ArduPilot and PX4 autopilots.
₹11,499 + 18% GST
Gps Gnss
The CUAV NEO 3 Pro is a DroneCAN-standard GNSS module that brings industrial-grade positioning and redundancy to ArduPilot and PX4 autopilots over a CAN bus interface.
₹17,999 + 18% GST
7 products
Esc
The SimonK 30A BLDC ESC is an entry-level electronic speed controller for brushless DC motors, flashed with the open-source SimonK firmware that improves throttle response and refresh rate compared to older stock firmware.
₹449 + 18% GST
Esc
The BLHeli_S 40A ESC with XT60 connector is a mid-range single brushless speed controller running the widely used BLHeli_S firmware, which supports modern digital throttle protocols including DShot, Multishot and OneShot alongside traditional PWM.
₹649 + 18% GST
Esc
The EMAX Nano 20A BLHeli ESC is a compact, lightweight speed controller from the EMAX Nano series, built specifically for racing-class multirotors.
₹899 + 18% GST
Esc
The Hobbywing XRotor 40A ESC is a dedicated multirotor speed controller engineered for reliability in larger drone platforms.
₹3,299 + 18% GST
Esc
The T-Motor AIR 40A 6S ESC is a single brushless speed controller from T-Motor's AIR series, designed as a cost-effective, reliable propulsion option for multi-rotor UAVs.
₹4,999 + 18% GST
Esc
The SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC combines four brushless speed controllers on one compact board, sharing a common power input to simplify wiring on a stacked FPV build.
₹5,999 + 18% GST
Esc
The Holybro Tekko32 F4 50A 4-in-1 ESC packs four high-current brushless speed controllers onto one board built around a fast F4 MCU running at 150MHz.
₹8,699 + 18% GST
7 products
Motors
The EMAX RS2205 2600KV is a 2205-class brushless outrunner built specifically for 5-inch FPV racing and freestyle quadcopters.
₹1,199 + 18% GST
Motors
The EMAX RS2306 2400KV is a 2306-class RaceSpec brushless motor that sits in the sweet spot for high-performance 5-inch FPV quadcopters.
₹2,199 + 18% GST
Motors
The SunnySky X2212 980KV is a workhorse 2212-class brushless outrunner that has become a default choice for entry-level and mid-size multirotors and small fixed-wing aircraft.
₹1,750 + 18% GST
Motors
The T-Motor Navigator MN3110 780KV is a 3110-class brushless motor designed for efficient, long-endurance multirotor and small UAV platforms.
₹5,990 + 18% GST
Motors
The T-Motor Navigator MN4014 400KV is a high-thrust 4014-class brushless motor built for medium-to-large multirotors and heavy-lift UAV platforms.
₹8,290 + 18% GST
Motors
The T-Motor Antigravity MN5008 340KV is an ultra-light, large-diameter brushless motor from T-Motor's Antigravity series, engineered specifically for maximum efficiency and endurance on heavy professional multirotors.
₹13,490 + 18% GST
Motors
The T-Motor Antigravity 4006 380KV (sold here as a pair) is an ultra-light, ultrathin brushless motor from T-Motor's Antigravity series, built for efficient, long-endurance flight on lightweight multirotors and small professional UAVs.
₹19,999 + 18% GST
8 products
Propellers
The Gemfan Hurricane 51466 V2 is a 5.1-inch, three-blade polycarbonate racing propeller engineered for high-speed FPV and freestyle quadcopters.
₹229 + 18% GST
Propellers
The HQProp 7x4x3 is a 7-inch, three-blade polycarbonate propeller for long-range and mid-size FPV quadcopters.
₹449 + 18% GST
Propellers
The Gemfan 6040 is a 6-inch, three-blade propeller moulded in glass-fibre-reinforced nylon, weighing around 5.2 grams per blade with a 5 mm mounting bore.
₹349 + 18% GST
Propellers
The 5045 3-blade is a 5-inch, three-blade propeller in the classic 5-by-4.5-inch racing geometry, supplied as a CW/CCW pair with a standard 5 mm mounting hole.
₹99 + 18% GST
Propellers
The Carbon Fiber 1045 is a 10-inch, two-blade propeller in the classic 10-by-4.5-inch geometry, moulded from carbon-fibre-reinforced composite with an epoxy resin finish.
₹99 + 18% GST
Propellers
The Carbon Fiber 9450 is a 9.4-inch, two-blade propeller in the self-tightening 9.4-by-5-inch format made popular by DJI Phantom-class platforms.
₹249 + 18% GST
Propellers
The Holybro 1045 is the factory replacement propeller for the popular Holybro X500 and S500 development quadcopters, supplied here as two pairs (four props total).
₹2,390 + 18% GST
Propellers
The SunnySky EOLO 15x5.5 is a 15-inch, large-diameter propeller moulded from carbon-fibre-reinforced nylon for heavy-lift and endurance multirotors.
₹2,490 + 18% GST
9 products
Frames
The MARK4 5 inch is a 3K carbon fiber freestyle and racing quadcopter frame built around a 225mm wheelbase, one of the most widely cloned and proven 5 inch platforms in FPV.
₹2,299 + 18% GST
Frames
The MARK4 V2 7 inch is a 3K full carbon fiber long-range and freestyle quadcopter frame with a 295mm wheelbase, scaled up from the popular MARK4 5 inch to carry 7 inch propellers.
₹3,090 + 18% GST
Frames
The SpeedyBee Bee35 is a 3.5 inch cinewhoop-style FPV frame with a 153mm wheelbase, designed for ducted, prop-protected flying that pairs smooth cinematic footage with safer indoor and close-proximity operation.
₹5,490 + 18% GST
Frames
The iFlight Nazgul5 V3 (Nazgul XL5) is a 5 inch freestyle quadcopter frame kit with a 245mm wheelbase and a true-X geometry, derived from one of iFlight's best-known freestyle platforms.
₹7,990 + 18% GST
Frames
The S550 is a 550mm hexacopter airframe and a popular entry-level multirotor platforms for aerial photography, mapping experiments and DIY drone learning.
₹5,490 + 18% GST
Frames
The LJI ZD550 is a 550mm foldable quadcopter airframe built from 3K full carbon fiber, designed for aerial photography, FPV and light survey work where portability and a stable camera platform both matter.
₹8,990 + 18% GST
Frames
The LJI ZD680 is a larger 680mm foldable quadcopter airframe in 3K full carbon fiber, stepping up from the ZD550 to carry bigger propellers and heavier payloads for survey, mapping and aerial photography.
₹12,490 + 18% GST
Frames
The Tarot 680 Pro (TL68P00) is a 695mm folding hexacopter airframe built from Toray 3K carbon fiber tubes and reinforced nylon connectors, a long-standing favourite for aerial photography and cinematography platforms.
₹13,490 + 18% GST
Frames
The Holybro X500 V2 ARF kit is a 500mm carbon fiber quadcopter platform that is one of the most widely used reference airframes for PX4 and ArduPilot development.
₹45,990 + 18% GST
7 products
Batteries Power
The CNHL Black Series 1500mAh 4S 130C is a high-discharge lithium-polymer pack built for 4-inch and light 5-inch FPV freestyle and racing quadcopters.
₹2,599 + 18% GST
Batteries Power
The CNHL Black Series 1300mAh 6S 130C is a compact, high-output lithium-polymer pack designed for modern 5-inch FPV freestyle and racing quadcopters that run on 6S power.
₹2,899 + 18% GST
Batteries Power
The CNHL MiniStar 1500mAh 6S 120C is a versatile lithium-polymer pack for 5-inch FPV freestyle and racing drones that run on the 6S standard.
₹3,799 + 18% GST
Batteries Power
The Tattu (Gens Ace) 16000mAh 6S 15C is a high-capacity lithium-polymer pack engineered for heavy-lift and agricultural multirotors rather than racing.
₹26,999 + 18% GST
Batteries Power
The Tattu (Gens Ace) 22000mAh 6S 25C is a large-format lithium-polymer pack built for the most demanding heavy-lift drone applications.
₹33,499 + 18% GST
Batteries Power
The HOTA D6 Pro is a dual-channel smart battery charger that lets pilots charge, discharge and balance two packs independently at the same time.
₹10,499 + 18% GST
Batteries Power
The ISDT Q6 Nano is a compact, entry-level smart charger that packs capable performance into a pocket-sized body.
₹8,499 + 18% GST
6 products
Telemetry Antennas
The Holybro SiK Telemetry Radio V3 (433MHz, 100mW) is a plug-and-play bidirectional radio set that creates a wireless serial data link between your drone's flight controller and a ground station running Mission Planner, QGroundControl or any MAVLink GCS.
₹6,999 + 18% GST
Telemetry Antennas
The Holybro SiK Telemetry Radio V3 (433MHz, 500mW) is the higher-power version of Holybro's popular plug-and-play telemetry set.
₹10,999 + 18% GST
Telemetry Antennas
The RFD900+ is a 1W (30dBm) long-range telemetry modem from Australian manufacturer RFDesign, designed for serious UAV and UGV operators who need a dependable command-and-telemetry link far beyond what a typical SiK radio can deliver.
₹14,499 + 18% GST
Telemetry Antennas
The RFD900x is RFDesign's flagship ultra-long-range telemetry and control modem, built around a new ARM 32-bit core processor.
₹43,999 + 18% GST
Telemetry Antennas
The TBS Crossfire Nano RX is a long-range UHF control receiver from Team BlackSheep, designed to pair with a Crossfire transmitter module for rock-solid R/C control of FPV drones and long-range aircraft.
₹3,999 + 18% GST
Telemetry Antennas
This Generic LoRa 5dBi SMA antenna is a multi-band omnidirectional whip antenna covering the 433MHz, 868MHz and 915MHz ISM bands used by LoRa, telemetry radios and IoT links.
₹899 + 18% GST
6 products
Fpv
The Foxeer Razer Mini V3 is a compact 1200TVL analog FPV camera built around a Sony 1/3-inch CMOS sensor, designed for pilots who want clean, low-latency video from a small, lightweight package.
₹3,199 + 18% GST
Fpv
The RunCam Phoenix 2 SE is an analog FPV camera built around a 1/2-inch CMOS sensor delivering 1000TVL of resolution, tuned by RunCam for freestyle and long-range flying where colour, dynamic range and low-light behaviour matter more than raw line count.
₹7,499 + 18% GST
Fpv
The RushFPV Max Solo is a high-power 5.8GHz analog video transmitter (VTX) rated up to 2.5W, built for pilots who need maximum range and signal penetration from a compact, efficiently cooled unit.
₹14,999 + 18% GST
Fpv
The Walksnail Avatar HD Goggles X are CADDX/Walksnail's HD FPV goggles, built around dual 1080p OLED screens running at up to 100Hz to deliver smooth, high-definition video from the Walksnail Avatar HD digital system.
₹26,999 + 18% GST
Fpv
The DJI O3 Air Unit is a complete HD digital FPV transmission system for custom drone builds, pairing a stabilised camera module with DJI's O3 (OcuSync 3) transmission.
₹31,499 + 18% GST
Fpv
DJI Goggles Integra are an all-in-one HD FPV headset that combine the headband and battery into a single integrated unit, eliminating the separate cabled battery pack used by some other DJI goggles.
₹42,999 + 18% GST
3 products
Payload Cameras
The Tarot T-3D IV (model TL3T02) is a compact 3-axis brushless gimbal built specifically to carry the GoPro Hero4 Session-class action camera on multirotors, fixed-wing platforms and other RC aircraft.
₹14,999 + 18% GST
Payload Cameras
The Tarot TL10X-T2D is a 2-axis stabilized ball gimbal with an integrated 10x optical-zoom camera, designed as a ready-to-fly observation and inspection payload for UAVs and unmanned ground/marine platforms.
₹72,999 + 18% GST
Payload Cameras
The GoPro Hero (2024) is GoPro's smallest and lightest 4K action camera, positioned as a simple, rugged capture device for action footage, FPV/drone clips and lightweight aerial passes.
₹48,999 + 18% GST
Guides
Choose the right drone flight controller: ArduPilot vs PX4, IMU sensors, I/O, redundancy and aircraft type. Practical selection guide for UAV builders.
Read guideMatch drone motors, ESCs and propellers: thrust-to-weight, KV, prop sizing, ESC current and voltage. A practical powertrain guide for UAV builders.
Read guideSize and operate drone batteries safely: LiPo vs Li-ion, capacity, endurance, charging, storage and transport. A practical guide for UAV operators.
Read guideUnderstand UAV telemetry and long-range data link architecture, antenna selection, real-world range factors and lawful spectrum use for reliable drone operations.
Read guideBuild a custom drone from components: the parts you need and how frame, motors, ESCs, props, flight controller, battery and telemetry interact in one BOM.
Read guidePX4 vs ArduPilot compared for real builds: vehicle support, tuning, QGroundControl vs Mission Planner, and how to pick a flight controller for your stack.
Read guideDrone endurance engineering: thrust-to-weight, Wh/kg, hover power, and how payload, battery and range trade off. A whole-system guide for UAV builders.
Read guideChoose and integrate a drone payload: gimbal selection, EO/IR and LiDAR mounting, centre of gravity, power and data links, and payload vs flight time.
Read guideDGCA drone rules in India: weight categories, who must register, UIN via Digital Sky and green, yellow and red airspace zones. Verify on dgca.gov.in.
Read guideImporting drones to India: why finished drones are largely restricted under DGFT, which components are importable, WPC ETA and R&D exemptions explained.
Read guideRTK vs PPK for drone surveying: how corrections work, accuracy and workflow trade-offs, connectivity realities in India, and choosing GNSS and flight hardware.
Read guideChoose the right drone GPS/GNSS module in India: constellations, dual-band L1/L5, RTK, dual-antenna heading and ArduPilot/PX4 compatibility. A practical buyer's guide.
Read guideA vendor-neutral guide to drone antenna selection, antenna gain vs range, directional vs omni antenna choices and UAV data link range planning for India operations.
Read guideA B2B guide to sourcing drone components in India: defining a BOM, vetting a drone components supplier, bulk RFQ, lead times, GST and compliance basics.
Read guide