Dual independent channels charge and balance two packs simultaneously
In stock
Batteries Power
HOTA D6 Pro Dual-Channel Charger
The HOTA D6 Pro is a dual-channel smart battery charger that lets pilots charge, discharge and balance two packs independently at the same time.
₹10,499 + 18% GST
SKU: BOTBIT-BATT-06 · Best for: Charging multiple FPV LiPo packs between flights
Overview
About HOTA D6 Pro Dual-Channel Charger.
The HOTA D6 Pro is a dual-channel smart battery charger that lets pilots charge, discharge and balance two packs independently at the same time. With AC and DC input, a clear colour LCD and a speed-shuttle control wheel, it is a desktop charger aimed at FPV and RC users who want fast, convenient turnaround between flights without juggling a single channel.
Each channel supports 1-6S lithium packs at up to 15A and 325W on DC input (up to 650W combined), while AC input is supported up to 200W with power distribution between channels. The charger handles a broad mix of chemistries including LiPo, LiHV, Li-ion and LiFe (1-6S), NiZn/NiCd/NiMH (1-16S), Pb lead-acid and smart batteries, and uses an optimised algorithm with efficiency rated up to 94%. A top-panel 5V USB output and a built-in wireless phone-charging pad add bench convenience.
The D6 Pro suits FPV pilots and RC hobbyists who fly multiple packs and want to charge two at once from either mains or a DC supply. Its dual independent channels, wide chemistry support and AC/DC flexibility make it a practical all-in-one charging hub for a home or field setup.
Key features
Why it stands out.
AC and DC input flexibility for both home bench and field use
Up to 15A and 325W per channel on DC (up to 650W combined)
Wide chemistry support: LiPo/LiHV/Li-ion/LiFe, NiMH/NiCd/NiZn, Pb and smart
Built-in 5V USB output and wireless phone-charging pad for bench convenience
Specifications
Selection facts.
| Type | Dual-channel AC/DC smart charger |
|---|---|
| AC input | 100-240V |
| DC input | 6.5-30V |
| Charge power | DC 325W x2 (650W); AC 200W |
| Charge current | 0.1-15A per channel |
| LiPo/LiHV/Li-ion/LiFe cells | 1-6S |
| NiZn/NiCd/NiMH cells | 1-16S |
| USB output | 5V / 2.1A |
| Display | Colour LCD |
| Weight | ~555 g |
| Dimensions | 108 x 105 x 76 mm |
Applications
Where it is used.
- Charging multiple FPV LiPo packs between flights
- Simultaneous dual-pack charging for fast session turnaround
- Field charging from a DC power supply or car battery
- Home bench charging from mains AC
- Charging mixed chemistries for RC cars, boats and planes
- Balancing and storage-charging packs for safe long-term storage
Buying guide
How to choose.
The main reason to choose the D6 Pro is its dual independent channels: you can charge two packs at once with separate settings, which roughly halves session turnaround for pilots who fly several batteries. Its AC/DC flexibility means you can run it from mains at home and from a DC supply or car battery in the field, making it a single charger for both situations.
Match the charger's output to your packs: with up to 15A and 325W per channel on DC, it comfortably handles common 4S and 6S FPV packs, though very large heavy-lift packs may charge faster on a dedicated high-power charger. Note that AC input is limited to 200W total, so the highest combined power requires a capable DC supply. Confirm you have a suitable DC power source if you need full output.
For Indian buyers, the AC input range covers local mains, so it works on a standard wall outlet for bench charging. Always balance-charge LiPo packs, set the correct cell count and chemistry before charging, and use the charger on a non-flammable surface. The wireless pad and USB output are handy bench extras but do not affect core charging performance.
FAQ
Common questions.
Can the D6 Pro charge two batteries at the same time?
Yes. It has two fully independent channels, so you can charge, discharge or balance two packs simultaneously with separate settings for each. This roughly halves turnaround time for pilots who fly multiple packs in a session, which is the charger's main advantage over single-channel units.
What is the difference between AC and DC power on this charger?
On DC input it delivers up to 325W per channel (up to 650W combined), while AC input is supported up to 200W total with power distribution between channels. For maximum output you need a capable DC power supply; AC is convenient for lower-power bench charging from a wall outlet.
Which battery types does it support?
It charges LiPo, LiHV, Li-ion and LiFe packs from 1-6S, NiZn/NiCd/NiMH from 1-16S, Pb lead-acid and smart batteries. That wide support makes it a single charger for FPV drones plus RC cars, boats and planes using different chemistries.
What is the maximum charge current per channel?
Each channel charges at up to 15A and 325W on DC input. That is enough to fast-charge typical 4S and 6S FPV packs, though for cell longevity many pilots charge at 1C to 2C rather than the maximum unless they need a quick turnaround.
Does it really have wireless phone charging?
Yes, the top panel includes a wireless charging pad for compatible phones plus a 5V USB output. These are convenience features for the bench and do not affect the charger's battery-charging performance, but they reduce clutter in a typical FPV charging setup.
Will it work on Indian mains power?
Its AC input accepts 100-240V, which covers standard Indian mains, so you can use it on a normal wall outlet for AC charging. For full dual-channel power you will need a separate DC power supply capable of the required wattage.
More in Drone Components
Related hardware.
Batteries Power
CNHL Black Series 1500mAh 4S 130C LiPo
The CNHL Black Series 1500mAh 4S 130C is a high-discharge lithium-polymer pack built for 4-inch and light 5-inch FPV freestyle and racing quadcopters.
₹2,599 + 18% GST
Batteries Power
CNHL Black Series 1300mAh 6S 130C LiPo
The CNHL Black Series 1300mAh 6S 130C is a compact, high-output lithium-polymer pack designed for modern 5-inch FPV freestyle and racing quadcopters that run on 6S power.
₹2,899 + 18% GST
Batteries Power
CNHL MiniStar 1500mAh 6S 120C LiPo
The CNHL MiniStar 1500mAh 6S 120C is a versatile lithium-polymer pack for 5-inch FPV freestyle and racing drones that run on the 6S standard.
₹3,799 + 18% GST
Batteries Power
Tattu 16000mAh 6S 15C LiPo (agri/heavy-lift)
The Tattu (Gens Ace) 16000mAh 6S 15C is a high-capacity lithium-polymer pack engineered for heavy-lift and agricultural multirotors rather than racing.
₹26,999 + 18% GST