Dedicated multirotor firmware tuned for smooth response and wide motor compatibility
In stock
Esc
Hobbywing XRotor 40A ESC
The Hobbywing XRotor 40A ESC is a dedicated multirotor speed controller engineered for reliability in larger drone platforms.
₹3,299 + 18% GST
SKU: BOTBIT-ESC-04 · Best for: 330-450 class photography and inspection multirotors
Overview
About Hobbywing XRotor 40A ESC.
The Hobbywing XRotor 40A ESC is a dedicated multirotor speed controller engineered for reliability in larger drone platforms. Unlike open-source racing ESCs, it runs Hobbywing's purpose-built multi-rotor firmware, which the company tunes specifically for smooth, fast throttle response and broad motor compatibility. It accepts a wide 2-6S LiPo input and drives the motor through low-resistance MOSFETs that keep the board cool while delivering high sustained current.
It is rated at 40A continuous with 60A peaks and supports a high throttle signal frequency of up to 621Hz, allowing tight, responsive control loops with modern flight controllers. The XRotor 40A is an OPTO design with no BEC, so it relies on external 5V power for electronics, and it uses a twisted-pair throttle signal cable to minimise interference. Output is via 3.5mm gold bullet connectors for clean motor wiring.
This ESC is aimed at builders of medium photography, survey and inspection multirotors in the 330-650mm class, where dependable propulsion matters more than racing-style digital protocols. For professional and prosumer drone applications that need robust, well-supported hardware from an established manufacturer, the XRotor 40A is a proven, vendor-neutral choice.
Key features
Why it stands out.
Wide 2-6S LiPo input with 40A continuous and 60A peak current
High 621Hz throttle signal frequency enables tight, responsive control loops
Low-resistance MOSFETs and heatsink design keep the ESC cool under load
Twisted-pair signal cable and 3.5mm bullet outputs for clean, reliable wiring
Specifications
Selection facts.
| Firmware | Hobbywing multirotor (proprietary) |
|---|---|
| Continuous Current | 40A |
| Peak Current | 60A |
| Battery Input | 2-6S LiPo |
| BEC | No (OPTO) |
| Signal Frequency | Up to 621Hz |
| Output Connector | 3.5mm gold bullet (female) |
| Weight | ~18.5 g (compact version) |
| Dimensions | 42.0 x 21.6 x 12.0 mm (compact) |
| Protections | Low-voltage, over-heat, signal-loss |
Applications
Where it is used.
- 330-450 class photography and inspection multirotors
- Survey and mapping drone propulsion
- Medium hexacopter and octocopter builds on 4-6S
- Prosumer aerial filming platforms
- Agricultural and industrial multirotor systems
- Reliable replacement ESC for Hobbywing-based drones
Buying guide
How to choose.
The XRotor 40A is built for multirotor work rather than racing, so choose it when you value Hobbywing's tuned firmware, wide 2-6S range and proven thermal design over open-source flexibility. Match the 40A continuous rating to motors that stay below that under load with your chosen props; for heavier lifting consider Hobbywing's higher-current XRotor or Pro models.
Remember this is an OPTO ESC with no BEC, so plan your power distribution to supply regulated 5V to the flight controller and receiver from a separate BEC or PDB. The 3.5mm gold bullet outputs make motor connection and replacement easy, which is handy on larger frames where you may swap motors during maintenance.
Note the two physical variants: a compact version and an extended version differ in length and wiring. Pick the size that fits your arm layout. For builders wanting digital protocols and telemetry, a BLHeli_32 ESC may suit better, but for dependable medium-multirotor propulsion backed by a major manufacturer, the XRotor 40A is an excellent choice in India.
FAQ
Common questions.
Does the XRotor 40A have a BEC?
No. It is an OPTO ESC with no built-in BEC, so it will not power your flight controller or receiver. You must supply regulated 5V from a separate BEC or a power distribution board with a voltage regulator built in.
What battery range does it support?
It accepts a wide 2-6S LiPo input, making it flexible across small and medium multirotors. This range lets you use the same ESC family from lighter 3-4S builds up to higher-voltage 6S platforms, provided your motor current stays within the 40A continuous rating.
Can I use open-source firmware like BLHeli on it?
No. The XRotor 40A runs Hobbywing's own multirotor firmware, which is tuned for smooth response and motor compatibility but is not flashable with BLHeli or AM32. If you specifically need open-source firmware and DShot, choose a BLHeli_32 ESC instead.
What does the 621Hz signal frequency mean for me?
It means the ESC can accept throttle updates very rapidly, allowing modern flight controllers to run tight, fast control loops. In practice this contributes to smooth, responsive handling, which is valuable on photography and inspection drones where stability is important.
What size multirotor is this ESC suited to?
Hobbywing positions the XRotor 40A for roughly 330-450 class multirotors and similar medium frames. With its 40A continuous and 60A peak rating it comfortably drives the motor-and-prop combinations typical of camera, survey and inspection drones in that size range.
Why are there compact and extended versions?
The two variants differ in board length and wiring layout to suit different arm and frame designs. The compact version is shorter with motor output wires, while the extended version is longer. Choose whichever matches your frame's mounting and wire-routing needs.
More in Drone Components
Related hardware.
Esc
SimonK 30A BLDC ESC
The SimonK 30A BLDC ESC is an entry-level electronic speed controller for brushless DC motors, flashed with the open-source SimonK firmware that improves throttle response and refresh rate compared to older stock firmware.
₹449 + 18% GST
Esc
BLHeli_S 40A ESC (XT60)
The BLHeli_S 40A ESC with XT60 connector is a mid-range single brushless speed controller running the widely used BLHeli_S firmware, which supports modern digital throttle protocols including DShot, Multishot and OneShot alongside traditional PWM.
₹649 + 18% GST
Esc
EMAX Nano 20A BLHeli ESC
The EMAX Nano 20A BLHeli ESC is a compact, lightweight speed controller from the EMAX Nano series, built specifically for racing-class multirotors.
₹899 + 18% GST
Esc
T-Motor AIR 40A 6S ESC
The T-Motor AIR 40A 6S ESC is a single brushless speed controller from T-Motor's AIR series, designed as a cost-effective, reliable propulsion option for multi-rotor UAVs.
₹4,999 + 18% GST