120C continuous discharge gives strong, stable power on 6S quads
In stock
Batteries Power
CNHL MiniStar 1500mAh 6S 120C LiPo
The CNHL MiniStar 1500mAh 6S 120C is a versatile lithium-polymer pack for 5-inch FPV freestyle and racing drones that run on the 6S standard.
₹3,799 + 18% GST
SKU: BOTBIT-BATT-03 · Best for: 5-inch 6S FPV freestyle quadcopters
Overview
About CNHL MiniStar 1500mAh 6S 120C LiPo.
The CNHL MiniStar 1500mAh 6S 120C is a versatile lithium-polymer pack for 5-inch FPV freestyle and racing drones that run on the 6S standard. Six cells in series deliver a 22.2V nominal voltage, and the 1500mAh capacity offers a useful step up in flight time over smaller 1300mAh packs while remaining manageable in weight.
Rated at 120C continuous discharge, the MiniStar pushes high sustained current with good voltage stability, giving consistent punch through fast manoeuvres and power loops. The pack ships with a pre-installed XT60 connector and a JST-XH balance lead, and its 6S architecture keeps operating current lower than an equivalent 4S setup, helping electronics run cooler. The MiniStar line is positioned as CNHL's well-rounded everyday series, balancing performance, durability and value.
This pack suits pilots who want slightly more endurance than a 1300mAh 6S pack without moving to a much heavier battery: long freestyle lines, racing, and general sport FPV flying. It is a dependable daily-driver for 5-inch 6S builds where the extra capacity buys a bit more time in the air.
Key features
Why it stands out.
1500mAh capacity adds flight time over smaller 1300mAh 6S packs
6S 22.2V design lowers operating current for cooler running gear
Pre-soldered XT60 connector fits most 6S FPV quadcopters directly
JST-XH balance lead works with any standard balance charger
Specifications
Selection facts.
| Chemistry | LiPo (lithium polymer) |
|---|---|
| Capacity | 1500mAh |
| Configuration | 6S1P (6 cells) |
| Nominal voltage | 22.2V |
| Continuous discharge | 120C |
| Burst discharge | 240C |
| Max charge rate | 5C |
| Discharge connector | XT60 |
| Balance connector | JST-XH |
| Dimensions | 56.5 x 34 x 78 mm |
| Weight | ~283 g |
Applications
Where it is used.
- 5-inch 6S FPV freestyle quadcopters
- 6S racing and sport drones
- Longer freestyle lines needing extra flight time
- Daily-driver FPV practice on 6S
- Sport RC models configured for 6S power
- FPV tuning and general acro flying
Buying guide
How to choose.
Make sure your quad is set up for 6S before choosing this pack: the 22.2V nominal voltage requires a 6S-rated flight controller and ESCs. The MiniStar 1500mAh sits between a light 1300mAh racing pack and heavier high-capacity packs, making it a balanced choice for pilots who want a little more flight time without a big weight penalty.
At 120C continuous, this pack delivers solid, stable power for 5-inch freestyle and racing. If you fly very aggressively and chase maximum punch, a 130C pack will sag slightly less, but for most pilots the MiniStar's combination of capacity and discharge is more than adequate. Charge through the JST-XH balance lead and stay within the rated 5C charge limit.
Keep a few packs in rotation so you always have a charged battery ready while others cool. Store at roughly 3.8V per cell when idle for several days, inspect packs for any swelling before flying, and use a fireproof bag for storage and transport to protect both the cells and your workspace.
FAQ
Common questions.
How is the MiniStar different from the Black Series?
The MiniStar is CNHL's well-rounded everyday line, while the Black Series targets the highest discharge ratings. This MiniStar pack is rated 120C continuous versus 130C on the Black Series, but it offers a larger 1500mAh capacity in 6S, trading a little peak punch for extra flight time.
What craft is the 1500mAh 6S MiniStar best for?
It suits 5-inch 6S FPV freestyle and racing quads, especially pilots who want more flight time than a 1300mAh pack provides. The extra capacity adds a bit of weight, so very weight-sensitive racers may still prefer a smaller pack.
What connector does it use?
The pack ships with a pre-soldered XT60 discharge connector and a JST-XH balance lead. XT60 is the standard for most 6S FPV builds, so it usually connects directly to your quad, and the balance lead works with any common balance charger.
How much does it weigh?
The pack weighs around 283 g including its wire and connector, and measures roughly 56.5 x 34 x 78 mm. That is heavier than a 1300mAh 6S pack, reflecting the larger 1500mAh capacity, so factor the added weight into your build's handling.
What charge rate should I use?
CNHL rates the pack at up to 5C charging, but charging at 1C to 2C is gentler and extends cell life for everyday use. Always balance-charge through the JST-XH lead, use a quality charger, and never leave a charging pack unattended.
How should I store and care for it?
Store the pack at about 3.8V per cell if you will not fly for several days, and keep it cool and dry in a fireproof LiPo bag. Check for any puffing or damage before each flight, and avoid leaving it fully charged or fully discharged for long periods.
More in Drone Components
Related hardware.
Batteries Power
CNHL Black Series 1500mAh 4S 130C LiPo
The CNHL Black Series 1500mAh 4S 130C is a high-discharge lithium-polymer pack built for 4-inch and light 5-inch FPV freestyle and racing quadcopters.
₹2,599 + 18% GST
Batteries Power
CNHL Black Series 1300mAh 6S 130C LiPo
The CNHL Black Series 1300mAh 6S 130C is a compact, high-output lithium-polymer pack designed for modern 5-inch FPV freestyle and racing quadcopters that run on 6S power.
₹2,899 + 18% GST
Batteries Power
Tattu 16000mAh 6S 15C LiPo (agri/heavy-lift)
The Tattu (Gens Ace) 16000mAh 6S 15C is a high-capacity lithium-polymer pack engineered for heavy-lift and agricultural multirotors rather than racing.
₹26,999 + 18% GST
Batteries Power
Tattu 22000mAh 6S 25C LiPo (heavy-lift)
The Tattu (Gens Ace) 22000mAh 6S 25C is a large-format lithium-polymer pack built for the most demanding heavy-lift drone applications.
₹33,499 + 18% GST