130C continuous discharge delivers strong, sag-resistant power on 6S builds
In stock
Batteries Power
CNHL Black Series 1300mAh 6S 130C LiPo
The CNHL Black Series 1300mAh 6S 130C is a compact, high-output lithium-polymer pack designed for modern 5-inch FPV freestyle and racing quadcopters that run on 6S power.
₹2,899 + 18% GST
SKU: BOTBIT-BATT-02 · Best for: 5-inch 6S FPV freestyle quadcopters
Overview
About CNHL Black Series 1300mAh 6S 130C LiPo.
The CNHL Black Series 1300mAh 6S 130C is a compact, high-output lithium-polymer pack designed for modern 5-inch FPV freestyle and racing quadcopters that run on 6S power. Six cells in series (6S1P) give a 22.2V nominal voltage, while the 1300mAh capacity keeps the pack light enough for agile flying without sacrificing usable flight time.
Its 130C continuous discharge rating allows the pack to push very high sustained current to the ESCs, which is exactly what 6S freestyle builds demand during fast throttle punches and power loops. The Black Series V2.0 build uses durable casing, an XT60 discharge connector and a JST-XH balance lead. Because 6S runs at higher voltage and lower current than 4S for the same power, many pilots find this pack runs cooler and holds voltage more confidently under load.
This battery is aimed at FPV pilots who have moved to the 6S standard and want a punchy, lightweight option for 5-inch freestyle, racing and tuning. It is a strong everyday pack for pilots who fly multiple packs per session and value crisp response over maximum endurance.
Key features
Why it stands out.
Light 1300mAh 6S size keeps 5-inch freestyle quads nimble and responsive
6S 22.2V architecture runs lower current for cooler, more efficient operation
Pre-fitted XT60 connector for direct compatibility with most 6S quads
JST-XH balance lead pairs with any standard LiPo balance charger
Specifications
Selection facts.
| Chemistry | LiPo (lithium polymer) |
|---|---|
| Capacity | 1300mAh |
| Configuration | 6S1P (6 cells) |
| Nominal voltage | 22.2V |
| Continuous discharge | 130C |
| Burst discharge | 200C |
| Max charge rate | 5C |
| Discharge connector | XT60 |
| Balance connector | JST-XH |
| Weight | ~223 g |
Applications
Where it is used.
- 5-inch 6S FPV freestyle quadcopters
- 6S racing and sport drones
- Power-loop and acro practice sessions
- Lightweight 6S builds prioritising agility
- FPV tuning and PID testing on 6S
- Sport RC models configured for 6S power
Buying guide
How to choose.
Confirm your build is wired for 6S before buying: the 22.2V nominal voltage of this pack requires a flight controller and ESCs rated for 6S. If your quad is set up for 4S, choose a 4S pack instead. For 5-inch freestyle, the 1300mAh capacity is a popular sweet spot that keeps weight down while still giving solid flight time.
The 130C continuous rating means this pack holds voltage well under the hard current draws typical of 6S freestyle. Pilots chasing more endurance can step up to 1500mAh or larger 6S packs at the cost of extra weight. Charge through the JST-XH balance lead and stay within the rated 5C charge limit to protect cell life.
Plan to own several packs so you can fly continuously while others cool and charge. Keep packs at storage voltage when idle for days, inspect for any puffing or damage before each session, and carry them in a fireproof bag, all of which extend safe service life.
FAQ
Common questions.
Is this a 4S or 6S battery?
It is a 6S pack: six cells in series for a 22.2V nominal voltage. Your flight controller and ESCs must be rated for 6S to use it safely. If your quad is built for 4S, use a 4S pack rather than this one to avoid damaging your electronics.
Why choose 1300mAh on 6S instead of a larger pack?
1300mAh is a light, agile capacity that pairs well with 5-inch freestyle and racing quads. It keeps all-up weight low for sharper handling, while still offering a reasonable flight time. Pilots who want longer flights can choose a heavier 1500mAh or larger 6S pack instead.
What connector and balance plug does it have?
It comes with a pre-soldered XT60 discharge connector and a JST-XH balance lead. XT60 is the standard plug for most 6S FPV quads, so it usually connects directly, and the JST-XH lead works with any common balance charger.
Does 6S run cooler than 4S?
For the same power output, 6S draws less current than 4S because it operates at higher voltage. Lower current means less heat in wires, connectors and ESCs, which is one reason many pilots have moved to 6S for 5-inch freestyle and racing.
What is the recommended charge rate?
CNHL rates this pack at up to 5C charging. Many pilots charge at 1C to 2C for everyday use to preserve cell life, reserving faster rates for quick turnarounds. Always balance-charge through the JST-XH lead and supervise charging.
How do I store it safely between sessions?
Discharge or charge the pack to storage voltage of about 3.8V per cell if you will not fly for several days. Keep it cool, dry and inside a fireproof LiPo bag. Avoid leaving the pack fully charged or fully drained for long periods, which degrades the cells.
More in Drone Components
Related hardware.
Batteries Power
CNHL Black Series 1500mAh 4S 130C LiPo
The CNHL Black Series 1500mAh 4S 130C is a high-discharge lithium-polymer pack built for 4-inch and light 5-inch FPV freestyle and racing quadcopters.
₹2,599 + 18% GST
Batteries Power
CNHL MiniStar 1500mAh 6S 120C LiPo
The CNHL MiniStar 1500mAh 6S 120C is a versatile lithium-polymer pack for 5-inch FPV freestyle and racing drones that run on the 6S standard.
₹3,799 + 18% GST
Batteries Power
Tattu 16000mAh 6S 15C LiPo (agri/heavy-lift)
The Tattu (Gens Ace) 16000mAh 6S 15C is a high-capacity lithium-polymer pack engineered for heavy-lift and agricultural multirotors rather than racing.
₹26,999 + 18% GST
Batteries Power
Tattu 22000mAh 6S 25C LiPo (heavy-lift)
The Tattu (Gens Ace) 22000mAh 6S 25C is a large-format lithium-polymer pack built for the most demanding heavy-lift drone applications.
₹33,499 + 18% GST