120pcs Dupont Jumper Wire Set (M-M, M-F, F-F)

40pcs each of male-male, male-female, female-female flexible jumper cables for Arduino/breadboard.

₹150 + 18% GST

SKU: BOTBIT-PWR-03 · Best for: Wiring Arduino, ESP32 and Raspberry Pi to sensors and modules

Qty

Overview

About 120pcs Dupont Jumper Wire Set (M-M, M-F, F-F).

This 120-piece Dupont jumper wire set is the everyday connecting cable of the Arduino and breadboard world. It contains 40 male-to-male, 40 male-to-female and 40 female-to-female flexible leads, so you have the right end type for almost any wiring job: board-to-board, board-to-module, or module-to-module.

Each wire is a flexible stranded conductor with a colour-coded ribbon and standard 2.54mm Dupont connectors that plug straight into headers, breadboards and jumper sockets. The ends are held in a keyed housing that can be peeled apart into individual strands or kept as a ribbon for tidy multi-wire buses.

At around Rs 150 for all three types, this is one of the best-value staples for any Indian maker's toolbox. Whether you are wiring an ESP32 to a sensor, jumping across a breadboard, or connecting a Raspberry Pi GPIO to a module, this set covers it.

Key features

Why it stands out.

120 wires total: 40x male-male, 40x male-female, 40x female-female

Flexible stranded conductors that route easily around modules and enclosures

Standard 2.54mm (0.1 inch) Dupont connectors compatible with common headers

Colour-coded ribbon; peel apart into single wires or keep as a bus

Approximately 20cm length, ideal for breadboard and short jumper runs

Reusable, plug-and-play, no soldering required

Specifications

Selection facts.

Quantity	120 pieces (3 x 40)
Types	Male-Male, Male-Female, Female-Female
Connector pitch	2.54mm / 0.1 inch Dupont
Length	Approx 20cm (200mm)
Conductor	Stranded copper (flexible)
Wire gauge	Approx 24-26 AWG
Insulation	PVC, multi-colour ribbon
Housing	Single-pin Dupont, separable

Applications

Where it is used.

Wiring Arduino, ESP32 and Raspberry Pi to sensors and modules
Breadboard-to-breadboard and breadboard-to-module connections
Connecting displays, motor drivers and relay boards to controllers
Prototyping and rapid rewiring of experimental circuits
Bench-testing modules before soldering a final PCB
Classroom and lab kits where flexible, reusable leads are needed

Buying guide

How to choose.

Choose this three-in-one set if you want one purchase that covers all common connection scenarios. Male-male jumps between breadboard rows and male headers; male-female connects a male header pin to a female socket or breadboard; female-female links two male-pin modules together.

If you only work with breadboards you may lean on male-male wires, but sensor modules and Raspberry Pi GPIO usually need male-female and female-female leads, so the mixed pack saves you buying separately. For longer runs, look for 30cm or 40cm variants; this set is the standard 20cm.

Pair it with a breadboard, an MB102 power module and the U-shape wire kit for a complete prototyping setup.

FAQ

Common questions.

What is the difference between M-M, M-F and F-F?

Male ends are pins that go into sockets; female ends are sockets that receive pins. M-M connects two sockets/breadboard holes, M-F connects a pin to a socket, and F-F connects two pins (for example two male-header modules).

Are these compatible with Arduino and Raspberry Pi?

Yes. The 2.54mm Dupont pitch matches Arduino headers, ESP32/ESP8266 boards, Raspberry Pi 40-pin GPIO and virtually all common sensor modules and breakout boards.

How long are the wires?

They are approximately 20cm (about 8 inches), which suits breadboard work and short jumper connections. Longer 30cm/40cm sets exist if you need more reach.

Can I separate them into single wires?

Yes. The ribbon peels apart easily so you can pull off exactly the number of wires you need and keep the rest as a bus.

Are these in stock in India?

Yes, this is a standard maker staple stocked by BotBit and shipped across India.